Honda 2010 CBF 250, Workshop Manual

Page: 186 / 291

FRONT WHEEL/SUSPENSION/STEERING
CBX250
Remove the spring of the fork.
Drain the fluid in the fork, pumping the tube of the fork
several times.
Remove the dust of the slide of the fork.
Remove the ring limiter on the slot of the slide of the fork.
i
Be careful not to cause scratches to the surface of slip of
the tube of the fork.
i
Hold the slide in a vise whose jaws are soft or protected
with pieces of wood or cloths. Using an Allen wrench,
remove the bolt and washer of sealing of the slide. In the
event that the bolt Allen turn together with the piston of
the fork, install temporarily the spring, the washer, the
seat of the spring and the bolt top of the fork.
Not tighten the slide of the fork.
SPRING OF THE FORK
SLIDE OF THE FORK
DUST COVER
LIMITER RING
BOLT ALLEN/SEALING WASHER
SLIDE OF THE FORK