Honda 2010 CBF 250, Workshop Manual

Page: 140 / 291

CLUTCH/GEAR SELECTOR
CBX250
Install the gear commanded of the oil pump in the axle of the
bomb, aligning its flat surfaces. Apply motor oil to the new o
ring and install it into the slot of the oil pump. Install the ears
of guide and a new gasket.
Install the eleven bolts of the lid right side of the casing of
the engine. Then, tighten firmly.
Install the new washers in sealing and tighten bolts of the
connections of the tubes of oil from the cylinder head.
Install the cable clutch.
Install the following components:
Tubes of oil radiator (page 4-9)
Support the pedal support right (page 14-19)
Supplying the engine with the motor oil recommended
(page 3-12).
Cable Adjustment of clutch (page 3-25).
Install the lid right side of the casing of the engine while
turning the arm of actuating the clutch in the clockwise, to
attach the slot on the spindle arm of operated by the flange
of the guide for operating the clutch, according to the
illustration.
GEAR COMMANDED OF Align O-RING
THE OIL PUMP
GASKET GUIDE SPIKES
SEALING
BOLT BOLT WASHERS
OIL TUBES
CLUTCH CABLE
ARM OF ACTUAT-
ING THE CLUTCH
SPINDLE
ARM
Dock:
GUIDE TO DRIVE
SIDE
COVER
NUEVA
NUEVA
A
C
E
IT
E
NUEVA