Honda 2010 CBF 250, Workshop Manual

Page: 20 / 291

GENERAL INFORMATION
CBX250
Location Material Notes
Pivot of the lever clutch Multipurpose grease
Surface of slip of the tube/handgrip accelerator
Slot guide of the cable accelerator
Pivot bracket
Pivot central support
Bearing wheels
Bearing of the steering column
Bearing pivot swing arm
Pivot brake pedal rear
Cmea and axle rear brake
Surface of slippage bolt of anchorage of the panel rear brake
Lips of dust cmea rear brake
Lips of each dust and lips of each lid of dust
Inside the gear box of the speedometer
Lips of dust of the steering column
Lips of dust pivot swing arm
Checkpoints and pistons of the cylinder master of the brake Brake fluid DOT 4
Coveralls, stamps and pistons tweezers brake
Pivot of the lever of front brake Silicon-based grease
Inside the protective rubber cord accelerator
Internal Part of protective rubber cord clutch
Pistons tweezers
Surfaces of slip of the pins of the tweezers
Surfaces of slip of the pins of the supports of the tweezers
Lips catch of oil from the fork Fork fluid
Lips of dust of the fork (suspension)
O ring of bolt top of the fork
Internal surfaces of the grip of rubber of the handlebars Adhesive Honda A o
Contact Surface of the box of air filter/tube of connection equivalent Cemedine
540
Thread of bolt of disk on the front brake Firming agent
Thread bolt Allen of the fork (Locks chemistry)
Thread of bolt fixing of the clip of the brake
Thread of bolt of bolt of the clip of the brake and the bolt the
support of the clamp
Bolt connecting the exhaust pipe / silencer
CHASSIS