Honda 2010 CBF 250, Workshop Manual

Page: 192 / 291

FRONT WHEEL/SUSPENSION/STEERING
CBX250
Install the seat and the spacer of spring.
INSTALLATION
Install the tube of the fork in the bridges lower and upper,
aligning the upper extremity of the tube with the upper surface
of the higher bridge, according to the illustration.
Tighten the bolt fixing of the bridge below to value specified.
TORQUE: 39 N.m (3,9 kg.m)
Bathe the new o ring with the fluid for suspension re-
commended and install it into the slot on the bolt top
of the fork. Install the bolt top of the fork in the tube of
the fork, but not tighten.
NOTE
Still not tighten the bolt top of the fork.
SEAT OF THE SPRING
SPACER OF SPRING
TOP SIDE
FIXING BOLTS
O-RING SEAT OF THE SPRING
ATF
NUEVO