Honda 2010 CBF 250, Workshop Manual

Page: 220 / 291

REAR WHEEL/BRAKE/SUSPENSION
CBX250
Install adjusters the drive chain.
INSTALLATION
Apply a thin layer of grease to the surface of settlement of bolt
pivot swing arm. Install the swing arm in the chassis.
From the left side of the motorcycle, install the bolt pivot
swing arm.
Install and tighten the nut pivot swing arm to the specified
torque.
TORQUE: 88 N.m (8,8 kg.m)
Install the bolt and nut lower damper
(page 13-12).
Install the rear wheel (page 14-9).
Install the silencer (page 2-5).
BRAKE PEDAL
DISMANTLING
Remove the silencer (page 2-5).
Remove the adjustment nut rear brake, the stem the brake, the
spring and the union arm trigger for the brake (page 14-3).
Remove the breather tube in support of the foot pedal.
Disjoint spring breaker of the light of the brake and the offspring
of the brake.
Remove the fixing bolts and the support of the foot pedal.
Disjoint the spring of return of offspring of the brake and the
support of the foot pedal.
Remove the bolt fixing and the brake pedal.
Remove the bolt cleft, the bolt and the stem from the brake arm
intermediate.
ADJUSTERS IN THE DRIVE CHAIN
SWING ARM
BOLT/NUT PIVOT SWING ARM
SWITCH OF THE LIGHT OF THE brake
SPRING
BREAKER
BREATHER TUBE
STEM FROM THE brake
FIXING
BOLTS
SUPPORT OF THE
FOOT PEDAL
SUPPORT OF THE PEDAL IN
SUPPORT
INTERMEDIATE ARM
FIXING BOLT
FASTENER
STEM FROM THE
BRAKE
SPRING FOR
THE RE-
TURN OF
BRAKE
PEDAL
CLEFT
BOLT
BRAKE
PEDAL