Chassis/FAIRING/EXHAUST SYSTEM
2-4
FUEL TANK
d
DISMANTLING/Installation
Remove the saddle (page 2-2). Remove the plates baffles side
(p. 2-3). Closing the valve of fuel. Disconnect the tube of fuel
valve of fuel.
NOTE
Remove the bolt fixing of tank and the collar. Then, apart
from the projections of the lids and the side and gums of fuel
tank. Disconnect the connector 2P sensor level of fuel.
Besides the fuel tank and gum fixation, pulling the tank
backwards. The installation is performed in reverse order
dismantling.
NOTE
FRONT FENDERS
DISMANTLING/Installation
Remove the screw and disconnect the cable from the gear
box of the speedometer, located in the fork of the
suspension. Remove the fixing bolts the fenders, the front
fenders, support, and the pin of the hose front brake. The
installation is performed in reverse order dismantling.
NOTE
Tighten fixing bolts the front fenders and the pin of the
hose of the brake.
After the installation turn the valve of fuel for the pos-
ition ON (open) and make sure that there is no fuel leaks.
During the dismantling, be careful not to damage the
connector 2P and sensor wiring of fuel level.
• The petrol (gasoline) is extremely flammable and
explosive under certain conditions. Keep out of the
reach of children. •Immediately Clean petrol (gasoline)
in case of bloodshed. •Work on a local well ventilated.
The presence of cigarettes, flames or sparks in the
local
labour
or where stocks petrol (gasoline) can
cause a fire or explosion.
CBX250
FUEL TANK
COLLAR
BOLT
CONNECTOR
2P
SENSOR FUEL LEVEL
PIN OF THE HOSE OF
THE brake
BOLT
CABLE
SUPPORT
Gear Box
OF THE SPEEDOMETER
SCREW
FRONT FENDERS
Summary of Contents for 2010 CBF 250
