Hioki MR8740, Instruction Manual

Page: 109 / 424

4.3 Loading Data
97
4
Chapte
r 4 Saving/L
oading Dat
a & Ma
nagin
g Files
Data saved on media or in the internal memory of the instrument can be reloaded.
Before attempting to load data, make sure that the storage media is inserted and the loading target
is correctly specified.
Only settings and measurement data saved in binary format can be loaded into the instrument.
Refer to "7.10 Register the Waveform in the U8793 Arbitrary Waveform Generator Unit "
(p.179), or the instruction manual of Models U8793, MR8790, and MR8791 regarding the detailed settings for
loading (registration) of pulse pattern data, arbitrary waveform data, program data.
When loading settings data, you can select whether to load communication settings such as the IP
address of the LAN.
No: Does not load the communi-
cation settings.
(Default setting)
Yes: Loads the communication set-
tings.
4.3 Loading Data
Data Loading Workflow
Insert media
Select a loading data.
(Extension: .SET )
Select whether to load the commu-
nication settings
Select [Load]
Select [Exec]
Loading
Settings Data
Waveform Data
Insert media
Select a loading data.
(Extension: .MEM , .FFT , .IDX ,
.SEQ )
Select [Load]
Select [Exec]
Loading
Waveform evaluation
area
Insert media
Select a loading data.
(Extension: .ARE, .BMP )
Select [Load]
Select [Exec]
Loading
Loading the Communication Settings
Please note that the currently set IP address and other communication settings will be over-
written if the loading of the communication settings is set to [Yes] and a setting file is loaded.