Hioki MR8740, Instruction Manual

Page: 195 / 424

7.11 Save the Waveforms Registered in the Model U8793 in the Media
183
6
Chapte
r 7 Utility Functions
7
You can save the arbitrary waveform data registered in U8793 in the media.
For saving methods, refer to "4.2.5 Save Waveform Output Data to the Media" (p.96).
Parameters (frequency, amplitude, and offset) for the output waveform that was configured on the Generator
screen (signal generation setting screen) can be changed on the Waveform screen.
The ability to configure and change these settings while outputting and measuring the resulting waveform pro-
vides a convenient way to measure a waveform while varying its parameters.
7.11 Save the Waveforms Registered in the
Model U8793 in the Media
7.12 Setting Output Waveform Parameters
1
Display the Waveform screen (if viewing another screen, press DISP to display the Waveform
screen).
2
Press CH.SET (to display the tabs).
3
Press CH.SET or select the [Generator] tab with the mouse.
4
Set the following parameters as desired.
For details, see the instruction manual of Models U8793, MR8790, and MR8791.
3
4
Select
Selections Description
Frequency Sets the frequency.
Amp Sets the amplitude.
Offset Sets the offset.
Output Turns output on or off.