Hioki MR8740 Instruction Manual Download Page 338

Page: 338 / 424

15.3 Accessing the Files on the Instrument From a Computer (Using FTP)

326

Select the file to download from the folder list and drag and drop* it on the down-
load destination (the desktop or a folder outside the IE window).

*: Click the file and hold the button down. Move the mouse pointer to the target destination,
and then release the button

Minutes and seconds may not be reflected on the file stamp (date) of the file.

Right click a file in the FTP folder list, and select

[Delete]

[Rename]

from the

pull-down menu.

15.3.3 Using FTP for File Operations

Downloading Files

Deleting and Renaming Files

On PC monitor

Drag & Drop

Right click

Click

Files cannot be uploaded to the instrument from the computer.

Summary of Contents for MR8740









































































































































































































































































































































































































































Search results

Summary of Contents for MR8740

Reviews:

Brands by name

Popular brands

Hioki MR8740, Instruction Manual

Search results

Summary of Contents for MR8740

Reviews:

Brands by name

Popular brands