Hioki MR8740, Instruction Manual

Page: 401 / 424

Appendix 3 About Options
A
11
Appe
ndix
Module (for generation)
These modules can be installed along with a measurement module.
Application Model
Number of
channels
Maximum output
frequency
Output voltage
Arbitrary waveform generation
U8793 Arbitrary Waveform Generator Unit 2 100 kHz -10 V to 15 V
Sine wave and DC generation
MR8790 Waveform Generator Unit 4 20 kHz
±
10 V
Pulse generation
MR8791 Pulse Generator Unit 8 100 kHz 0 to 5 V
Measurement probes, cords, and clamps
Application Model Description
Maximum
input voltage
Mximum rated
voltage to earth
Voltage
measurement
Model L9197 Connec-
tion Cord
For high voltage 600 V AC, DC
(CAT III)
600 V AC/DC,
(CAT IV)
300 V AC,DC
Model L9198 Connec-
tion Cord
For low voltage
300 V AC, DC 600 V AC, DC
Model L9790 Conection
Cord 600 V AC, DC
(CAT III)
600 V AC/DC,
(CAT IV)
300 V AC,DC
Model L9217 Connec-
tion Cord
Isolated BNC-BNC 300 V AC, DC -
Model 9322 Differential
Probe
For high voltage
Following item is required for
connection.
• Voltage measurement with an
input modulerequires the
Model 9418-15 AC Adapter
*
(CAT II)
2000 VDC,
1000 VAC
(CAT III)
600 VAC, DC
-
Model P9000-01 Differential
Probe
Model P9000-02 Differential
Probe The Model Z1008 AC Adapter
or a commercially available
USB cable is required.
(CAT III)
1000 VAC, DC
-
Model 9665 10:1 Probe
Maximum rate voltage above
ground is that of the input mod-
ule.
1 kVrms
(up to 500 kHz)
-
Model 9666 100:1 Probe
Maximum rate voltage above
ground is that of the input mod-
ule.
5 kVpeak
(up to 1 MHz)
-
Logic signal input
Model 9320-01 Logic
Probe
Four channels, for detecting
voltage and closed/open contact
points
- -
Model MR9321-01 Logic
Probe
Four isolated channels, for de-
tecting AC/DC voltage on/off (for
small terminal types and for
lines) High range
250 V rms
Low range 150
V rms
250 V rms
(CAT II)
Model 9327 Logic Probe
Four channels, for detecting
voltage and closed/open contact
points (high-speed type)
- -