Hioki MR8740, Instruction Manual

Page: 190 / 424

7.9 Making Detailed Settings for Input Modules
178
Method
Selects the control method for waveform output.
Select
Settings when selecting arbitrary waveform
Data name
Register/delete the data of the outputted waveform. Maximum eight waveforms
can be registered.
Filter
Filter the output waveform.
Clock Freq
Set the clock frequency of the D/A converter that generates waveforms.
The period and frequency of the output waveform are displayed on the lower
level.
Delay
Set the delay for waveform generation. When the delay value is positive, the
phase is progressive.
Loop
Set the repetition count for generating waveforms.
Amp Adj
Set the amplitude level for waveform output.
Offset
Set the offset voltage for waveform.
Selections Description
Manual Restricts control of signal output to Signal Generation screen.
Sync. Augments manual control with signal output in synchronization with
the start and end of measurement.
START key: Starts output when measurement starts.
STOP key: Stops output when measurement stops.
Keys Augments manual control by allowing signal output to be manipu-
lated using the instrument’s keys.
START key: Starts output.
STOP key: Stops output.
Manual Trigger key: Pauses output.
Off (Default setting) to 1 MHz
-250,000 data to 250,000 data (Default settings: 0)
1 to 50,000,
∞
(Default setting:
∞
)