manualshive.com logo in svg

Hioki MR8740, Instruction Manual

Share
Download
Hioki MR8740 Instruction Manual Download Page 272

12.3  Setting FFT Analysis Conditions

260

The display range of the vertical (y) axis can be set to automatically suit analysis results, and can be freely
expanded and compressed.

12.3.10Setting the Display Range of the Vertical Axis 

(Scaling)

1

2

1

Select automatic or manual scaling of the y-axis display.

Move the flashing cursor to the 

[Scale]

 column of the Analysis No.

to set.

Select

2

When 

[Manu]

 is selected

Set the upper and lower limits to display.

Move the flashing cursor to the 

[Lower]

 or 

[Upper]

 item.

Set the upper and lower limits to display the analysis results.
Setting range: -9.9999E+29 to +9.9999E+29
(with exponent from E-29 to E+29)

See:

"7.1.3  Alphanumeric Input" (p.139)

Auto

Scaling of the vertical (y) axis is automatically set according to
analysis results. (default setting)

Manu-
al

Scaling of the vertical (y) axis can be set as desired, to suit the pur-
pose of the measurement. 
This is useful for magnifying or reducing the displayed amplitude, 
and for shifting the displayed waveform up or down.

Procedure

To open the screen: Right-click and select 

[STATUS]

 

→

 

[Status]

 sheet

How do I copy settings to other calculation No.?

See:

"7.8  Copying settings to other channels (calculation No.) (Copy function)" (p.158)

Summary of Contents for MR8740









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands