manualshive.com logo in svg

Hioki MR8740, Instruction Manual

Share
Download
Hioki MR8740 Instruction Manual Download Page 142

6.6  Monitoring Input Levels (Level Monitor)

130

All input waveform levels can be monitored in real time.
Analog channels and logic channels can be displayed at the same time.

6.6 Monitoring Input Levels (Level Monitor)

6.6.1 Level Monitor

Procedure

To open the menu: Right-click and select 

[DISP]

 

→  

Display Menu

Analog channel level

To hide the level monitor

Select

 [Monitor]

 again.

Selecting 

[Monitor]

 displays the analog channel level

on the left of the Waveform screen, the logic channel
level on the right of the Waveform screen, and the
monitor numerical values at the bottom of the Wave-
form screen.

Monitor values of analog channels

(Up to 6 digits are displayed.)

Display menu

Display format 2 - 16 screens (p.70)
Level monitors are displayed for each graph.

Upper and lower limit indication is combined with
level monitor.

See:

"6.7.1  Showing Upper/Lower Limit On Waveform 
Screen" (p.132)

Logic channel 
level display

Level display of an analog channel

High

Hi gh& Low

Low

Input
Level

Waveform Display
Range Full Span

Level display of logic channels

How to View a Level Monitor

When the display setting is On, 
the part indicated in white takes 
the color specified for the wave-
form display. When the setting is 
Off, the part becomes gray. The 
part indicated in black takes the 
background color.

Input levels are not displayed for channels having no corresponding input mod-
ule installed.

Summary of Contents for MR8740









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands