Hioki MR8740, Instruction Manual

Page: 135 / 424

6.3 Moving the Waveform Display Position
123
5
Chap
ter 6 W
aveform Scree
n Mo
nitoring an
d Analysis
6
This applies to the Memory function and Recorder Function.
From the scroll bar you can verify the relative position and size of the displayed portion of a wave-
form within the overall recorded waveform.
Trigger time, trigger position and A/B cursor positions (when using voltage axis cursor or trace cur-
sors) are also displayed.
When measuring or displaying an existing waveform, use the mouse to scroll.
6.3
Moving the Waveform Display
Position
6.3.1 About Display Position
Verifying the Display Range on the Scroll Bar
Trigger Point A Cursor B Cursor
T A
B
Blue frame: Screen display range (25 div)
With zoomed display
(p.128)
Blue frame: Zoomed display range (lower waveform)
Pink frame: Display range (upper waveform)
Red bar: Recorded waveform
(Gray bar if waveform
is within recording
length)
6.3.2 Scrolling the Measurement Waveform
Scrolling measured waveforms left or right
To open the screen: Left-click the [WAVE] icon.
1
Left-click the [WAVE] icon.
Left-click the [WAVE] icon on the top right of the Waveform screen.
2
Move the mouse left or right while holding down the left mouse button
(dragging) when the mouse cursor is in the Waveform screen.
The waveform is scrolled.
You can rotate the wheel button forward or backward to make fine scrolling adjustments.
To see past waveforms in Roll Mode
You can view past waveforms during measurement by scrolling the
waveforms with the mouse. To redisplay a waveform, select
[Scroll] .