Hioki MR8740, Instruction Manual

Page: 312 / 424

13.6 Editor Command Details
300
13.6 Editor Command Details
Load Wave
The waveform shown on the Waveform screen is loaded into the editor and displayed.
Instructions
1
Select
[Load Wave]
.
2
Select the type of waveform capture to perform. The waveform displayed on the
Waveform screen will be loaded into the editor.
3
Select
[Load Wave]
to exit waveform capture mode.
Zoom in/out
Magnifies or compresses the waveform shown on the screen in the horizontal and ver-
tical directions.
Instructions
1
Select
[Zoom in/out]
.
2
Select whether to magnify or compress the waveform.
3
Set the amount of magnification or compression.
• You can set values with the mouse.
• The amount of movement can be set in 0.04/div steps.
Select
Waveform
capture Captures the storage waveform displayed on the Waveform screen.
Overlay capture Captures overlay waveforms shown on the Waveform screen after connecting the uppermost
and lowermost positions with the same display color and filling in the resulting enclosed space.
When the waveforms are overlapping, undisplayed portions of the waveforms cannot be rec-
ognized. This option can be selected when an overlay has been drawn on the screen.
Memory seg-
mentation refer-
ence waveform Captures the memory segmentation reference waveform shown on the Waveform screen after
connecting the uppermost and lowermost positions with the same display color and filling in
the resulting enclosed space. When the waveforms are overlapping, undisplayed portions of
the waveforms cannot be recognized. This option can be selected when an overlay has been
drawn on the screen.
Execute Performs magnification or compression processing based on the settings and creates an eval-
uation area.
Exit magnifica-
tion/compression Exits magnification/compression mode.