Hioki MR8740, Instruction Manual

Page: 256 / 424

12.2 Operation Workflow
244
12.2 Operation Workflow
Recording and
Calculation
Settings
Set FFT analysis (p.245)
Set the input channel (p.262) *1
Set trigger criteria (p.185) *1
Analysis and
Saving
Save Analyze
[Exec]
or
[START]
Waveform screen
Installation & Connections
"Chapter 2 Measurement Preparations" (p.35)
See: "12.6 Saving Analysis
Results" (p.268)
See: "12.7 Analysis with the
Waveform Screen" (p.269)
Settings for saving (p.268) *1, *2
Set the screen layout of the
Waveform screen (p.263)
Turn Power On
Finish by clicking
[STOP]
or automatically
(depending on trigger settings)
*1: Settings are the same as for the Memory function.
*2: Even after analysis, save settings can be set manually.
Finished Recording
Recording Starts
Measure with New Settings Measure with Existing Settings
Set as occasion demands.
Set FFT analysis (p.245)
[START]
Calculation occurs after acquiring the
waveform.
FFT calculation
Set up input channels (p.262) *1
Set the screen layout of the
Waveform screen (p.263)
Settings for saving (p.268) *1, *2
About internal
operation
"Trigger Modes and Aver-
aging" (p.254)
[Status]
sheet
Set the Function to FFT (p.245)
[Status] sheet
Channel set-
tings window,
[Each Ch]
sheet
[Status] sheet
Trigger set-
tings window
[File Save]
sheet
Channel set-
tings window,
[Each Ch]
sheet
[File Save]
sheet