Hioki MR8740, Instruction Manual

Page: 120 / 424

5.1 Printing Type and Workflow
108
There are basically three types of printing operations.
5.1 Printing Type and Workflow
To print data automatically
during measurement
To selectively print data
after measurement
Auto Print
(default setting)
When the "Send Print Key" is exe-
cuted by using Model 9333, print
contents can be selected before
printing. This is convenient to print
different items each time.
At the File screen, the file list is print-
ed. At other screens, a list is printed.
Selection Print
When the Memory function is used,
data are acquired for the recording
length and then printed automatically.
When the FFT function is used, data is
printed automatically after FFT analy-
sis is exited.
In both cases, print contents are se-
lected before the measurement.
To print data immediately
when the "Send Print Key" is
executed by using Model
9333 after measurement
If the "Send Print Key" is executed
by using Model 9333, at Waveform
screen: Waveform
At File screen: File list
At other screen: List
During waveform printing, the range
specified with
[Print Area] is print-
ed.
Quick Print
Prepare Model 9333 LAN
Communicator
Set measurement configuration
Set print target for
[Auto Print]
Set the print contents
Measurement
Print
[Printer] sheet
The followings can be print-
ed simultaneously.
• Waveform data
• Numeric value calculation
results
Prepare Model 9333 LAN
Communicator
Set [Print Select] to [Yes].
Start and Stop Measurement
Send Print Key
Select the print contents
Print
[Printer] sheet
Settings window
Either of the following can
be printed.
• Whole waveforms
• A-B waveforms
• Post-/Pre-Trigger waveforms
• Lists (Settings List)
• Report
Prepare Model 9333 LAN
Communicator
Set [Print Select] to [No] .
Set the print area
Start and Stop Measurement
Send Print Key
Print
[Printer] sheet
During waveform printing,
either of the following can
be printed.
• Whole waveforms
• A-B waveforms
When both Auto Print and Auto Save are enabled, Auto Save is executed first.
However, when the Roll Mode function (default setting: Auto) is used with the
Memory function, Auto Print has priority.