manualshive.com logo in svg

Hioki MR8740, Instruction Manual

Share
Download
Hioki MR8740 Instruction Manual Download Page 174

7.9  Making Detailed Settings for Input Modules

162

Renew Data 
(Data Refresh)

The data refresh rate can be set to Fast, Normal, or Slow.
The default setting is 

[Normal]

. This allows stable measurement while removing

noise. For quicker response, select 

[Fast]

, but note that this will make the mea-

surement more susceptible to noise. For further improved measurement stability,
select 

[Slow]

.

Select

Selections

Description

Fast

Data are updated approximately every 1.2 ms.

Normal

Data are updated approximately every 100 ms. (default setting)

Slow

Data are updated approximately every 500 ms.

Summary of Contents for MR8740









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands