manualshive.com logo in svg

Hioki MR8740, Instruction Manual

Share
Download
Hioki MR8740 Instruction Manual Download Page 17

Safety Information

5

Mouse Operations

Click:

 Press and quickly release the left button of the mouse.

Right-click:

 Press and quickly release the right button of the mouse.

Double-click:

 Quickly click the left button of the mouse twice.

Drag:

 Move the mouse while holding down the left button of the

mouse, and then release the button at the desired position.

Activate:

 Click on a screen to activate that screen.

Accuracy

We define measurement tolerances in terms of f.s. (full scale) values, with the following meanings:

f.s. (maximum display value or scale length)

The maximum displayable value or scale length. In this instrument, the maxi-
mum displayable value is the range (V/div) times the number of divisions (20) on
the vertical axis. 
Example: For the 1 V/div range, f.s. = 20 V

rdg. (reading value, displayed value, or indicated value)

The value currently being measured and indicated on the measuring instrument.

Summary of Contents for MR8740









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands