manualshive.com logo in svg

Hioki MR8740, Instruction Manual

Share
Download
Hioki MR8740 Instruction Manual Download Page 318

  

306

Setting Descriptions____________________________________________

Grid

Select the grid (graticule) type for the waveform screen.

Time Value

Display the time from the trigger point on the display.

• During external sampling, the number of points is fixed.
• These settings affect the values read at the A/B cursors.

Start Backup

Preserves measurement condition settings. If a power outage occurs while
recording, it resumes automatically when power is restored. When triggering is
enabled, the awaiting-trigger state is activated.

• Valid only during recording.
• This function does not start automatically when the instrument is turned on.

Display Color

Screen background and character colors on the Waveform screen can be set as
desired. Select 

[Color Edit]

 change the 

[R]

 (red), 

[G]

 (green) and 

[B]

 (blue) values

of each item to change its color. 

(

 p.308)

Beep Sound

This function audibly indicates warnings and operating conditions by beep
sounds.

Off

No grid displayed.

Dotted Line

Display a dotted-line grid. (default setting)

Solid Line

Display a solid-line grid.

Time

Display the time from the trigger point (fixed units). (default setting)

Time (60)

Display the time from the trigger point (sexagesimal (base-60) system).

div

Display the number of divisions (div) from the trigger point.

Date

Display time of waveform acquisition.

Sample Num

Display the number of data points from the trigger point.

Off (default setting) / On

Color 1 / Color 2 / Color 3 / Color Edit

Off

Beep sounds are disabled.

Warning

Beeps sound for error messages (warning displays) and upon NG (fail) judg-
ments. (default setting)

Warn+Act

In addition to the warning beeps above, beeps sound to indicate start, trigger, 
stop and auto-save-finish.

Summary of Contents for MR8740









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands