GSK 980MDc, User Manual

Page: 366 / 473

Chapter 3 Parameter
347
Ⅲ
Inst
allation
SAR =1
：
Detect spindle SAR signal prior to cutting;
=0
：
Not detect spindle SAR signal prior to cutting.
THDA =1
：
Thread machining adopts exponential acceleration and deceleration;
=0
：
Thread machining adopts linear acceleration and deceleration.
VAL5 =1
：
For 5
th
axis move key, ← is positive
，
→ is negative;
=0
：
For 5
th
axis move key, → is positive
，
← is negative.
VAL4 =1
：
For 4
th
axis move key,
↖
is positive
，
↘
is negative;
=0
：
For 4
th
axis move key, ↘ is positive
，
↖ is negative.
VALZ =1
：
For Z axis move key, ↑ is positive
，
↓ is negative;
=0
：
For Z axis move key, ↓ is positive
，
↑ is negative.
VALY =1
：
For Y axis move key, ↗ is positive
，
↙ is negative;
=0
：
For Y axis move key,
↙
is positive
，
↗
is negative.
VALX =1
：
For X axis move key, → is positive
，
← is negative;
=0
：
For X axis move key, ← is positive
，
→ is negative
0 1 7 3 *** TMANL SMAL *** *** *** *** ESCD
SMAL =1
：
Spindle manual gear shift for S command;
=0
：
Spindle auto gear shift for S command.
0 0 0 1 *** *** *** ACS HWL *** ISC ***
ACS =1: Analog voltage control of spindle speed;
=0: Switching control of spindle speed.
HWL =1: MPG mode;
=0: Step mode.
ISC =1: Increment system IS-C(0.0001mm/0.00001inch)
=0: Increment system IS-B(0.001mm/0.0001inch)
0 6 0 0 *** *** *** *** *** GST GTT SGB
SGB =1: M-type gear shift mode B
；
=0
：
M-type gear shift mode A.
GST =1
：
Analog spindle gear shit is M;
=0
：
Analog spindle gear shit is T.
GST =1
：
Positioning signal is used for gear shift;
=0
：
Positioning signal is used for spindle orientation.
0 6 0 1 MSI *** MSEN *** *** *** *** ***
MSI =1: Multi-Spindle control function is B type
；
=0: Multi-Spindle control function is A type.
MSEN =1: Multi-Spindle function is valid
；
=0: Multi-Spindle function is invalid.