GSK 980MDc, User Manual

Page: 272 / 473

Chapter 7 Auto Operation
253
Ⅱ
Operation
2
）
In the above page, find the required block, press , and there is a
（）
at the end of
program as follows:
4 ） Input note content in （） as follows:
Relevant explanation:
Program note supports Chinese characters.
Edit Chinese note in the PC machine, and then download it to the
CNC, and Chinese cannot be displayed, but the Chinese characters cannot be directly input in the CNC.
6.2.2 Program Note Modification
Operation steps are the same as program note setting steps on section 6.2.1
6.3 Deletion of a Program
6.3.1 Deletion a Single Program
Steps:
1
）
Select the PRG DISPLAY page in Edit mode;
2
）
Key in address key , numerical key . . . by sequence( take an
example of the program O0001
);
3) Press key, program O0001 will be deleted