GSK 980MDc, User Manual

Page: 149 / 473

GSK980MDc Milling CNC System User Manual
130
I Programming
3. When an M98 block contains another NC command (for example,G01 X100.0 M98 P_), the machine
stops in the single block mode. On the other hand, G65 does not stop the machine.
4. With G65 or G66, the level of local variables changes. With M98, the level of local variables does not
change.
z Non-modal call
（
G65
）
When G65 is specified, the macro program specified at address P is called. Argument (data) can be
passed to the custom macro program.
Format
：
G65 P_ L_ <argument>_
；
Explanation ： P —— number of the program to be called
L —— repetition count
（
1 by default, 1 to 9999 can be specified
）
<Argument> —— Data passed to the macro. Its value is assigned to the corresponding local
variables.
Argument specification: two types of argument specification are available.
Argument specification I
：
it uses letter other than G, L, O, N and P once each. In repeated specification, the
last one prevails.
Argument specification I
Note
：
Addresses that need not to be specified can be omitted. Local variables corresponding to an omitted address
are set to null.
Argument specification II
：
Uses A, B, C and Ii, Ji, Ki (i is 1~10) and automatically decides the
argument specification type according to the letters and the sequence. Uses A, B, C once each and uses I,
J, and K up to ten times.
Argument specification II