GSK 980MDc, User Manual

Page: 215 / 473

GSK980MDc Milling CNC System User Manual
196
Ⅱ
Operation
When PLC alarms or prompts, an address information is displayed with black background in the
information line; CNC alarms or prompts, the causes and troubleshooting are displayed with black
background in the information line.
Remove alarm: is pressed to remove the alarm, and some alarms are referred to causes and
troubleshooting.
Note 1: When PLC alarms or prompts, an address information is displayed with black background in the
information line;
Note 2: CNC alarms or prompts, the causes and troubleshooting are displayed with black background in the
information line;
Note 3: No. 0~No.3999 are CNC alarm numbers, No. 4000~No. 4999 are CNC warning numbers, No. 5000~No.
7999 are PLC alarm numbers and No. 8000~No. 9999 are PLC warning numbers;
Note 4: When parameters which is valid after power-on are modified, alarm can be removed after power-on
again;
Note 5: Detailed alarm messages and PLC alarms are referred to Appendix I and Appendix . Ⅱ
2
）
ALM LOG page: press to enter the alarm page, press to enter alarm log page.
The page records recent history alarm messages including alarm type, alarm number, alarm time.
Press , , , to view alarm log messages. The display page is shown below:
①
Alarm log sort order: the latest alarm log message is located the headmost of the first page
and others are arranged orderly. There are up to 200 alarm messages. When the alarm log
exceeds 100 messages, the last history log message is cleared.
②
Clear history record: press to clear all alarms and prompt messages below
2-level operation permission in the history record display page.
3
）
Clear alarm: when many alarms occur simultaneously, is pressed once to clear one alarm
where the cursor is ( press and simultaneously to clear all alarms in ALM interface).
4
）
Clear warning: when many warnings occur simultaneously, or is pressed once to clear
one warning where the cursor is ( press and simultaneously to clear all warns in ALM
interface).