GSK 980MDc, User Manual

Page: 353 / 473

GSK980MDc Milling CNC System User Manual
334
Ⅲ
Inst
allation
=0
：
Coordinate system not holding on at power down, G54 coordinate system is set after power on.
RSCD =1
：
G54 coordinate system when reset 4;
=0
：
Coordinate system not changed when reset.
PPD =1
：
Relative coordinate set by G92, G52, G54.1, G54
～
G59;
=0
：
Relative coordinate not set by G92, G52, G54.1, G54 ～ G59.
0 5 4 2 *** *** *** *** *** RLC MRC ZCL
RLC =1
：
Local coor. system is canceled after cnc is reseted
；
=0 ： Local coor. system isn’t canceled after cnc is reseted.
MRC =1
：
Local coor. system is canceled after M02 or M30 is executed
；
=0 ： Local coor. system isn’t canceled after M02 or M30 is executed.
ZCL =1: Local coor. system is canceled after machine ref. position is set
；
=0
：
Local coor. system isn’t canceled after machine ref. position is set.
0 5 5 1 *** *** *** *** *** *** SKPI G31P
SKPI =1
：
High level valid for skip signal;
=0
：
Low level valid for skip signal.
G31P =1
：
G31 immediately stops when skip signal is valid;
=0
：
G31 slows down to stop when skip signal is valid.
0 5 6 2 RIN *** *** XSC *** SCLZ SCLY SCLX
RIN =1: Rotation angle of coordinate rotation is defined by G90,G91
；
=0: Rotation angle of coordinate rotation is defined by G90.
XSC =1: Scale rate of X,Y,Z is defined by I,J,K or para NO.5421
；
=0: Scale rate of X,Y,Z is defined by P or para NO.5421.
SCLZ =1: Z scale function is valid
；
=0: Z scale function is invalid.
SCLY =1: Y scale function is valid
；
=0: Y scale function is invalid.
SCLX =1: X scale function is valid
；
=0: X scale function is invalid.
0 5 8 2 *** *** *** *** *** LPTK RPTK BRCH
LPTK =1
：
Hole locating is done by cutting feed on line continuous drilling;
=0
：
Hole locating is done by rapid feed on line continuous drilling;
RPTH =1: Hole locating is cutting path in circle and rectangle continuous drilling;
=0
：
Hole locating is rapid path in circle and rectangle continuous drilling;
BRCH =1
：
Plane returning is selected by G98 and G99 in continuous drilling;