manualshive.com logo in svg

GRAPHTEC FC2250 Series, User Manual

Share
Download
GRAPHTEC FC2250 Series User Manual Download Page 12

VII

CONTENTS

Blade Length Adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

3.10  Meda and Cuttng Condtons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

3.11  Settng the Cuttng Orgn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

3.12  Usng the Copy Functon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

3.13  Usng the Hold Functon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23

CH4.  REGISTRATION MARK SETTINGS AND DETECTION

4.1 

Outlne of the Regstraton Mark Functon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

4.2 

Settng the Regstraton Mark Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

4.3 

Settng the Regstraton Mark Pattern  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Settng the Regstraton Mark Spacng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Settng the Center Regstraton Mark  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

4.4 

Regstraton Mark Dstance Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

USER

 (Manual Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

CUSTOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

4.5 

Setting the Registration Mark Size

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.6 

Settng the Regstraton Mark Offset  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

4.7 

Adjustng the Regstraton Mark Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Adjustng the Regstraton Mark Sensor by  

Usng a Pre-prnted Cross Symbol and a Plotted Cross Symbol . . . . . . . . . . . . . 4-11

Adjustng the Regstraton Mark Sensor by  

Usng One Plotted and One Cut Cross Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

4.8 

Settng the Regstraton Mark Detecton Judgment Level . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14

Adjustng the Senstvty of the Regstraton Mark Sensor. . . . . . . . . . . . . . . . . . . . . 4-15

4.9 

Settng the Regstraton Mark Detecton Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

4.10  Settng the Sensng Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

4.11  Axs Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

4.12  Regstraton Mark Detecton. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Manual Detecton  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

4.13  Settng the Regstraton Mark Cuttng Functon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

4.14  Settng the Regstraton Mark Detecton Start Poston . . . . . . . . . . . . . . . . . . . . . . . . . . .4-25

CH5.  FUNCTION SETTINGS AND OPERATIONS

5.1 

PAUSE Menu Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

5.2 

Clearng the Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5.3 

Rasng/Lowerng the Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

5.4 

Movng the Pen Carrage to the Upper Rght Poston . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

5.5 

Settng the Communcaton Condtons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

5.6 

Settng the Data Format to be Receved  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

5.7 

Assgnng THICK Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

5.8 

Settng the Overlay Functon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

5.9 

Assgnng Tool Numbers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

5.10  Assgnng Perforaton Cuttng. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

5.11  Settng the Tool Interval Adjustment Value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

5.12  Settng the Dstance Adjustment Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

5.13  Sortng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Summary of Contents for FC2250 Series



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands