GRAPHTEC FC2250 Series, User Manual

Page: 56 / 130

4-5
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
4.3 Setting the Registration Mark Pattern
Your plotter can read five registration mark patterns: 1, 2, 3, Mirror 1 and Mirror 2. If pattern 3, Mirror 1 or
Mrror 2 has been selected, ths functon allows you to set the spacng between the regstraton mark lne
segments.
Registration mark pattern 1 Registration mark pattern 2 Registration mark pattern 3
Registration mark pattern Mirror 1 Registration mark pattern Mirror 2
: Cutout area : Cutout area
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE OFFSET
SPEED QUALITY
MARK TOOL U/D
BUFFER CLR. VIEW
(3) Press the [F1] key (MARK) to dsplay the regstraton mark functons selecton menu.
FORCE OFFSET
SPEED QUALITY
MODE DIST ADJ
TYPE OTHER SETUPS
(4) Press the [F1] key (TYPE) to dsplay the menu for settng the regstraton mark pattern.
FORCE OFFSET
SPEED QUALITY
1 MARK TYPE 3
•2 MIRROR
The currently selected settng s ndcated by a black dot [
•
].
To read regstraton mark pattern 1, press the [F1] key (1).
To read regstraton mark pattern 2, press the [F2] key (2).
To read regstraton mark pattern 3, press the [F3] key (3).
To read regstraton mark pattern mrror 1 or mrror 2, press the [F1] key (1) or the [F2] key (2) together wth the [F4]
key (MIRROR).
When the dsplayed settng s satsfactory, press the [ENTER] key to confirm your selection.
If registration mark pattern 3 has been selected, the mirror mode setting (see Section 5.16, "Setting the Mirror
Mode" will be set to off.