GRAPHTEC FC2250 Series, User Manual

Page: 68 / 130

4-17
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
4.9 Setting the Registration Mark Detection Speed
Ths functon sets the speed of the pen carrage at the tme when regstraton mark lnes are detected.
Change the speed settng f regstraton marks cannot be detected due to the type of meda used or the
thckness of the regstraton mark lnes.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE OFFSET
SPEED QUALITY
MARK TOOL U/D
BUFFER CLR. VIEW
(3) Press the [F1] key (MARK) to dsplay the regstraton mark functons selecton menu.
FORCE OFFSET
SPEED QUALITY
MODE DIST ADJ
TYPE OTHER SETUPS
(4) Press the [F4] key (OTHER SETUPS) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
SIZE ADJ. SENS
ORG OFT SENS OPT
(5) Press the [F4] key (SENS OPT) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
LEVEL
SENS SPD SENS STEP
(6) Press the [F2] key (SENS SPD) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
SENSING SPEED
SPEED = 5 cm/s
Use the [ ] or [ ] key to change the numerc value, and then press the [ENTER] key to confirm your selection.
Setting range: 1 to 30 (cm/s) [Default value: 5]
Settng a slower speed (a smaller value) enables regstraton marks to be detected more easly.
(7) Press the
[PAUSE] key to cancel PAUSE mode.