GRAPHTEC FC2250 Series, User Manual

Page: 71 / 130

4-20
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
If the value you nput s exceedngly large (1.5 tmes or greater) or very small (0.5 tmes or less), or f the angle of tlt
wth respect to the orgnal axs tlt s 45° or greater, the followng prompt s dsplayed. In ths case, please re-nput
the value.
FORCE OFFSET
SPEED QUALITY
DISTANCE ADJUSTMENT
ERROR. SET AGAIN!
(5) If 3-pont or 4-pont adjustment has been selected, the menu for adjustng the dstance between ponts 1 and 3 wll
be dsplayed. Make the settngs n the same way as for the dstance between ponts 1 and 2.
(6) When the dstances between all the ponts have been adjusted, the followng menu for settng the axs adjustment
orgn s dsplayed. (Ths menu s not dsplayed when 4-pont readng has been selected.)
FORCE OFFSET
SPEED QUALITY
AXIS ORIGIN POINT
X= 0 Y= 0
Use the [ ] [ ] [ ] [ ] keys to move the pen carrage (the tp of the tool or pen selected by the current settng)
to the poston for settng the axs adjustment orgn, and then press the [ENTER] key . If 2-axs adjustment has been
performed prevously, the pen carrage wll move automatcally to the prevously set reference pont. In ths case, use
the [ ] [ ] [ ] [ ] keys to make any adjustments requred.
(7) When all the adjustments have been completed, the plotter returns to Ready status.