GRAPHTEC FC2250 Series, User Manual

Page: 103 / 130

5-27
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
Setting the High Movement Speed
Ths settng determnes the hgh speed settng when one of the [ ] [ ] [ ] [ ] keys s held down.
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key repeatedly untl the followng menu s dsplayed.
FORCE OFFSET
SPEED QUALITY
OPTION1 OPTION2
(3) Press the [F4] key (OPTION2) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
POSITION OPT
MOVE SPD TEST
(4) Press the [F3] key (POSITION OPT) to dsplay the menu shown below.
FORCE OFFSET
SPEED QUALITY
STEP HI SPEED
LOW SPEED LCD•
(5) Press the [F3] key (HI SPEED) to dsplay the hgh-speed settng screen.
FORCE OFFSET
SPEED QUALITY
HI SPEED 20 cm/s
Use the [ ] or [ ] key to change the numerc value and then press the [ENTER] key to confirm your selections.
To cancel your selectons, press the [NEXT] key .
Setting range: 1 to 30 (cm/s) [Default value: 20]
(6) Press the [PAUSE] key to cancel PAUSE mode.
This setting is retained in the plotter's internal memory even while the plotter is turned off.