GRAPHTEC FC2250 Series, User Manual

Page: 76 / 130

4-25
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
4.14 Setting the Registration Mark Detection Start Position
Ths functon sets the start poston for regstraton mark detecton.
(1) Select ether AXIS or MARKS for the regstraton mark mode (see Secton 4.2, "Settng the Regstraton Mark Mode".
(2) Wth the plotter n Ready status, press the
[ORIGIN] key to dsplay the followng menu.
FORCE OFFSET
SPEED QUALITY
1 3
2 MANUAL
(3) Press the [NEXT] key to dsplay the followng menu.
FORCE OFFSET
SPEED QUALITY
MIRROR MARKS
START POS
(4) Press the [F2] key (START POS) to dsplay the menu for settng the start poston for the readng of regstraton
marks.
FORCE OFFSET
SPEED QUALITY
•SAVE POS ORG POS
CURRENT POS AUTO•
The currently selected settng s ndcated by a black dot [
•
].
To save the current poston and use t as the start poston for the next regstraton mark detecton operaton, press
the [F1] key (SAVE POS).
To start regstraton mark detecton from the current pen carrage poston, press the [F2] key (CURRENT POS).
To start regstraton mark detecton from the orgn pont, press the [F3] key (ORG POS).
If the [F4] key (AUTO) is pressed, the sensor performs detection while moving in a diagonal direction if the first
regstraton mark (the regstraton mark at the lower left poston) s not detected from the current start poston.
When the dsplayed settng s satsfactory, press the [ENTER] key to confirm your selection.