GRAPHTEC FC2250 Series, User Manual

Page: 110 / 130

5-34
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
Procedure
Turn on the plotter whle holdng down the [ ] key to dsplay the specal functons menu on the LCD.
In GP-GL command mode In HP-GL
TM
command mode
LANGUAGE SELECTION
[ English ]
LENGTH UNIT
•mm inch
; , : COMMAND
•ENABLED DISABLED
W COMMAND
TOOL UP TOOL DOWN•
LENGTH UNIT
•mm inch
MODEL EMULATED
•7550 7595
CONDITION PRIORITY
MANUAL PROGRAM•
TOOL SELECT
•ENABLED DISABLED
INIT. BLADE CONTROL
•2mm BELOW OUTSIDE
TOOL UP MOVE
ENABLED DISABLED•
PAUSE KEY
HOLDING MENU•
BEEPER
•ENABLED DISABLED
TOOL SELECT WAIT
•ENABLED DISABLED
CIRCLE RESOLUTION
AUTO DEFAULT•
TOOL SELECT WAIT
•ENABLED DISABLED
BEEPER
•ENABLED DISABLED
PAUSE KEY
HOLDING MENU•
TOOL UP MOVE
ENABLED DISABLED•
INIT. BLADE CONTROL
•2mm BELOW OUTSIDE
TOOL SELECT
•ENABLED DISABLED
CONDITION PRIORITY
MANUAL PROGRAM•
LANGUAGE SELECTION
[ English ]
Press the [NEXT] key to cycle through the menus.
The currently selected settng s ndcated by a black dot [
•
].
Press the [F2] or [F4] key to change the settng as requred, and then press the [ENTER] key . To cancel your selecton
and proceed to the next menu, press the [NEXT] key .
When you have finished setting all of the special functions, turn off the plotter.
•
Your settings are registered in the plotter's internal memory and retained even while the plotter is turned off.
•
The special functions can also be set by selecting "Function"> "Special Functions" in the PAUSE menu.