GRAPHTEC FC2250 Series, User Manual

Page: 59 / 130

4-8
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
(3) If the regstraton mark mode settng was 3-pont readng or 4-pont readng, the menu for adjustng the dstance
between ponts 1 and 3 wll be dsplayed. Make the settngs n the same way as for the dstance between ponts 1
and 2.
(4) When adjustment has been completed, the plotter returns to Ready status.
CUSTOM
(1) Press the [F3] key (CUSTOM) n the regstraton mark dstance adjustment menu.
FORCE OFFSET
SPEED QUALITY
10mm•
5mm 50mm
The currently selected settng s ndcated by a black dot [
•
].
To select the 5 mm dstance adjustment dvsor value, press the
[F2] key .
To select the 10 mm dstance adjustment dvsor value, press the [F3] key .
To select the 50 mm dstance adjustment dvsor value), press the
[F2] key .
When the dsplayed settng s satsfactory, press the [ENTER] key .