Grandstream Networks UCM6510 User Manual Download Page 43

Page: 43 / 483

P a g e

UCM6510 IP PBX User Manual

Version 1.0.20.31



Added options “External Host” and “Use IP address in SDP” in Web GUI



PBX



SIP Settings



NAT.

[SIP Settings/NAT]



Improved CDR. [CDR Improvement]



Added Network Status page under web GUI System Status



Network Status. [Network Status]

Firmware Version 1.0.2.7



Added PRI T310 configuration. [Digital Hardware Configuration]



Added Announcement Center. [ANNOUNCEMENTS CENTER]

Firmware Version 1.0.2.5



Added option to enable/disable SSH access via LCD or Web GUI. [TLS Security][SSH Access]



Added ability to select voicemail storage (Email + WAV is supported). [Voicemail Email Settings]



Added support to allow remote peer extensions in ring group. [Remote Extension in Ring Group]



Added ability to strip and prepend digits in inbound routes. [Inbound Rule Configurations]



Added ability to search extensions on Extension page.



Added user portal for users to log in with extension number, access user information, extension

configuration and CDR. [USER PORTAL]



Added support to send Fax via Web GUI. [Fax Sending]



Added “Enable LDAP” option to skip the extension from UCM default LDAP phonebook. [Voicemail

Email Settings]



Added video RE-INVITE support.



Added DDNS Support. [DDNS Settings]



Added ability to search the CDR by called number. [CDR]



Added ability to select the file types for automatic backup. [Backup/Restore]



Added automatic backup support on SD Card or USB storage. [Backup/Restore]



Added support to skip trunk authentication by time condition.



Added option to send P-Asserted-Identity header in SIP Register Trunk. [VOIP TRUNKS]



Added ability to specify trunks in CDR filters. [CDR]



Added ability to use Pattern in Caller Number to filter CDR. [CDR]



Added support to send UNREGISTER when VoIP trunk is disabled. [VOIP TRUNKS]



Added LDAP client support. [LDAP Client Configurations]



Added option to specify the chronological order to voice mails. [VOICEMAIL]



Added option to configure whether to skip pressing 1/2 to accept or reject calls from Follow Me

[FOLLOW ME]



Added option to specify port range in Port Forwarding configuration. [Port Forwarding]



Added ability to go back to IVR menu from Dial By Name by pressing the star key. [Dial By Name

Configuration]



Added ability to filter alert logs. [Alert Log]



Added ability to delete alert logs. [Alert Log]



Added NAT option for peer trunk. [VOIP TRUNKS]

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands