Grandstream Networks UCM6510 User Manual Download Page 294

Page: 294 / 483

P a g e

293

UCM6510 IP PBX User Manual

Version 1.0.20.31

PAGING AND INTERCOM GROUP

Paging and Intercom Group can be used to make an announcement over the speaker on a group of phones.

Targeted phones will not ring but answer immediately using speaker. The UCM6510 paging and intercom

can be used via feature code to a single extension or a paging/intercom group. This section describes the

configuration of paging/intercom group under Web GUI



Call Features



Paging/Intercom

Configure Paging/Intercom Group



Click on "Add" to add paging/intercom group.



Click on

to edit the paging/intercom group.



Click on

to delete the paging/intercom group.



Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the

SIP INVITE message sent to the callee in paging/intercom call.

Configure Multicast Paging

Figure 180: Multicast Paging

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands