Grandstream Networks UCM6510 User Manual Download Page 385

Page: 385 / 483

P a g e

384

UCM6510 IP PBX User Manual

Version 1.0.20.31

setting is "No".

Send Remote Party ID

Configure whether the Remote-Party-ID should be sent or not. The default

setting is "No".

Generate In-Band Ringing

Configure whether the UCM6510 should generate inband ringing or not.

The default setting is "Never".



Yes:

The UCM6510 will send 180 Ringing followed by 183 Session

Progress and in-band audio.



No:

The UCM6510 will send 180 Ringing if 183 Session Progress has

not been sent yet. If audio path is established already with 183 then

send in-band ringing.



Never:

Whenever ringing occurs, the UCM6510 will send 180 Ringing

as long as 200OK has not been set yet. Inband ringing will not be

generated even the end point device is not working properly.

Server User Agent

Configure the user agent string for the UCM6510.

Send Compact SIP Headers

If enabled, compact SIP headers will be sent. The default setting is "No".

Transparent Call-Info header

UCM supports transparent call info header in order to integrate GDS door system with GXP21XX Color

phones, the UCM will forward the call-info header to the phone in order to request the live view from GDS

door system and give the option to open the door via softkey.

Figure 247: Transparent Call-Info

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands