Grandstream Networks UCM6510, User Manual

Page: 224 / 483

P a g e | 223
UCM6510 IP PBX User Manual
Version 1.0.20.31
Notes:

Multiple patterns can be used. Each pattern should be entered in
new line.

Users can add comments to the end of patterns to better organize
and keep track of complex rules
by typing “
/*
” and “
*/
” before and
after each comment respectively.

Example:
_X.
_NNXXNXXXXX /* 10-digit long distance */
_818X. /* Any number with leading 818 */
Disable This Route
After creating the outbound route, users can choose to enable and disable
it. If the route is disabled, it will not take effect anymore. However, the route
settings will remain in UCM. Users can enable it again when it is needed.
Password
Configure the password for users to use this rule when making outbound
calls.
Call Duration Limit
Once call duration limit is enabled, it will set the maximum duration of call-
blocking.
Maximum Call Duration
User can customize the maximum call duration (in seconds) that is allowed
for the outbound call. By default, this value is set to 0 means there is no
limit for the call duration.
Warning Time
This option will give caller warning when call duration is approaching to its
limit. If the warning time is set to ‘y’, the warning tone will be played to caller
when y seconds is left to end the call by UCM.
Warning Repeat Interval
Once this option is set to ‘z’, it will repeatedly be warning caller every z
seconds after the first warning.
PIN Groups
If selected, the Password, Privilege Level and Enable Filter on Source
Caller ID will not take effect.
For more details, refer to [PIN Groups] section.
PIN Groups with Privilege
Level
If enabled and PIN Groups are used, Privilege Levels and Filter on Source
Caller ID will also be applied.
Password
Configure the password for users to use this rule when making outbound
calls.
Privilege Level
Select privilege level for the outbound rule.

Internal :
The lowest level required. All users can use this rule.