Grandstream Networks UCM6510 User Manual Download Page 463

Page: 463 / 483

P a g e

462

UCM6510 IP PBX User Manual

Version 1.0.20.31

Figure 327: Reboot UCM6510

Click on "OK" to reboot the UCM6510 and check the firmware version after it boots up.

--------------------------------------------------------------------------------------------------------------------------------------------

Notes:



Please do not interrupt or power cycle the UCM6510 during upgrading process.



The firmware file name allows the use of the special characters besides the following restricted
characters: # $ ^ & * + ( ) [ ] / ; ‘ | , < > ?

--------------------------------------------------------------------------------------------------------------------------------------------

No Local Firmware Servers

Service providers should maintain their own firmware upgrade servers. For users who do not have

TFTP/HTTP/HTTPS server. Some free windows version TFTP servers are available for download from

http://www.solarwinds.com/products/freetools/free_tftp_server.aspx

http://tftpd32.jounin.net

Please check our website at

http://www.grandstream.com/support/firmware

for latest firmware.

Instructions for local firmware upgrade via TFTP:

1. Unzip the firmware files and put all of them in the root directory of the TFTP server;

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands