Grandstream Networks UCM6510 User Manual Download Page 140

Page: 140 / 483

P a g e

139

UCM6510 IP PBX User Manual

Version 1.0.20.31

Figure 82: Zero Config Sample

– Device Preview 3

10.

Click on “Apply Changes” to apply saved changes.

11. On the Web GUI



Value-added Features



Zero Config



Zero Config

page, click on

to send

NOTIFY to trigger the device to download config file from UCM6510.

Now all the 9 phones in the network will be provisioned with a unique extension registered on the UCM6510.

3 of the phones will be provisioned to display Spanish on LCD and the other 5 will be provisioned to display

English on LCD. The GXV3275 used by the supervisor will be provisioned to use the default language on

LCD display since it is not specified in the global policy.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands