Grandstream Networks UCM6510 User Manual Download Page 116

Page: 116 / 483

P a g e

115

UCM6510 IP PBX User Manual

Version 1.0.20.31

Figure 65: Global Policy Categories

The following tables list the Global Policy configuration parameters for the SIP end device.

Table 22: Global Policy Parameters

– Localization

Language settings

Language

Select the LCD display language on the SIP end device.

Date and Time

Date Format

Configure the date display format on the SIP end device’s LCD.

Time Format

Configure the time display in 12-hour or 24-hour format on the SIP end
device’s LCD.

NTP Server

Configure the URL or IP address of the NTP server. The SIP end device

may obtain the date and time from the server.

Time Zone

Configure the time zone used on the SIP end device.

Table 23: Global Policy Parameters

– Phone Settings

Default Call Settings

Dial Plan

Configure the default dial plan rule. For syntax and examples, please refer

to user manual of the SIP devices to be provisioned for more details.

Enable Call Features

When enabled, “Do Not Disturb”, “Call Forward” and other call features can

be used via the local feature code on the phone. Otherwise, the ITSP

feature code will be used.

Use # as Dial Key

If set to “Yes”, pressing the number key “#” will immediately dial out the

input digits.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands