Grandstream Networks UCM6510 User Manual Download Page 304

Page: 304 / 483

P a g e

303

UCM6510 IP PBX User Manual

Version 1.0.20.31

Cycle

Custom Prompt

The custom prompt to play to callers waiting in queue once the destination prompt

cycle period has been reached. Callers can press 1 to be redirected to the

destination configured in

Destination

Select failover destination to redirect callers to after pressing 1 during the custom

prompt.

Advanced Settings

Virtual Queue

Position

Announcement

Queue Chairman

Refer to

Call Center Settings & Enhancements

section for detailed information

about these features.

Enable Agent Login

Enables quick static agent login/logout via GXP21xx softkeys. Supports

GXP21XX endpoint on firmware 1.0.9.18 and higher.

Leave When Empty

Configure whether or not callers will be disconnected from the queue based on

agent availability.



Yes

Callers will be disconnected from the queue if all agents are paused or

unavailable.



Never disconnect the callers from the queue when the queue is empty.



Strict

Callers will be disconnected from the queue if there are no agents logged in

or if all agents are paused or unavailable.

Dial in Empty Queue

Configure whether the callers can dial into a call queue if the queue has no agent.

The default setting is "No".



Yes

Callers can always dial into a call queue.



Callers cannot dial into a queue if all agents are paused or unavailable.



Strict

Callers will be disconnected from the queue if there are no agents logged in

or if all agents are paused or unavailable.

Failover Destination

Configure the destination to redirect callers to base on the Leave When Empty

and Dial in Empty Queue values:



Play Sound.



Extension.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands