Grandstream Networks UCM6510 User Manual Download Page 255

Page: 255 / 483

P a g e

254

UCM6510 IP PBX User Manual

Version 1.0.20.31

Cleaner Options

Enable Conference

Schedules Cleaner

If this option is enabled, conference schedules will be automatically

cleaned as configured.

Conference Schedules Clean

Time

Enter the clean time (in hours). The valid range is from 0 to 23.

Clean Interval

Enter the clean interval (in days). The valid range is from 1 to 30.

After configuring the scheduled conference, it will be shown under Conference Schedule page as below:

Figure 145: Conference Schedule

Once the conference room is scheduled, at the kick time, all users will be removed from conference room

and no extension is allowed to join the conference room anymore. At the scheduled conference time,

UCM6510 will send INVITE to the extensions that have been selected for conference.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands