Grandstream Networks UCM6510 User Manual Download Page 275

Page: 275 / 483

P a g e

274

UCM6510 IP PBX User Manual

Version 1.0.20.31

VOICE PROMPT

The UCM6510 supports multiple languages in Web GUI as well as system voice prompt. The following

languages are currently supported in system voice prompt:

English (United States), Arabic, Chinese, Dutch, English (United Kingdom), French, German, Greek,

Hebrew, Italian, Polish, Portuguese, Russian, Spanish, Catalan, Czech, Swedish and Turkish.

English (United States) and Chinese voice prompts are built in with the UCM6510 already. The other

languages provided by Grandstream can be downloaded and installed from the UCM6510 Web GUI directly.

Additionally, users could customize their own voice prompts, package them and upload to the UCM6510.

Language settings for voice prompt can be accessed under Web GUI



PBX Settings



Voice

Prompt



Language Settings

. Additionally, UCM6510 allows to customize specific prompt instead of full

language package, and it provides ability to upload greeting files for extensions.

Language Settings

Download and Install Voice Prompt Package

To download and install voice prompt package in different languages from UCM6510 Web GUI, click on

"Add Voice Prompt Package" button.

Figure 165: Language Settings for Voice Prompt

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands