Grandstream Networks UCM6510, User Manual

Page: 433 / 483

P a g e | 432
UCM6510 IP PBX User Manual
Version 1.0.20.31
Alert Contact
This feature allows the administrator to be notified when one of the Alert events mentioned above happens.
Users could add administrator's Email address under Web GUI

Maintenance

System Events

Alert
Contact to send the alert notification to an email (Up to 10 Email addresses can be added) or also specify
an HTTP server where to send this alert.
Table 147: Alert Contact
Super Admin
Email
Configure the email addresses to send alert notifications to.
Up to 10 email addresses can be added.
Admin Email Configure the email addresses to send alert notifications to.
Up to 10 email addresses can be added.
Email Template Please refer to section Password
Protocol Protocol used to communicate with the server. HTTP or HTTPS.
Default one is HTTP .
HTTP Server The IP address or FQDN of the HTTP server.
HTTP Server Port HTTP/HTTPS port
Warning Template Customize the template used for system warnings.
Default one: {"action":"${ACTION}","mac":"${MAC}","content":"${WARNING_MSG}"}
Notification
Template
Customize the notification template to receive relevant alert information.
By default:
{"action":"${ACTION}","cpu":"${CPU_USED}","memery":"${MEM_USED}","disk":"${
DISK_USED}","external_disk":"${EXTERNAL_DISK_USED}"}
Note:
The notification message with “action:0” will be sent periodically if Notification
Interval is set.
Notification
Interval
Modifies the frequency at which notifications are sent in seconds. No notifications will
be sent if the value is "0". Default value: 20
Template
Variables
${MAC} : MAC Address
${WARNING_MSG} : Warning message
${TIME} : Current System Time
${CPU_USED} : CPU Usage
${MEM_USED} : Memory Usage
${ACTION} : Message Type. Refer to [Table 146: Alert Events]
${DISK_USED} : Disk Usage
${EXTERNAL_DISK_USED} : Disk Usage