Grandstream Networks UCM6510 User Manual Download Page 110

Page: 110 / 483

P a g e

109

UCM6510 IP PBX User Manual

Version 1.0.20.31

Figure 59: Auto Provision Settings

Table 21: Auto Provision Settings

Enable Zero Config

Enable or disable the Zero Config feature on the PBX. The default setting

is enabled.

Enable Automatic

Configuration Assignment

By default, this is disabled. If disabled, when SIP device boots up, the

UCM6510 will only send the configuration path to the device when you

have any manual configuration on the device. This manual configuration

includes:



Any configuration under BASIC and CUSTOM page of the device in

Zero Config page



If any global or model template (expect for the default template) is

selected for the assigned device in Zero Config page.

Note:

When disabled, SIP devices can still be provisioned by manually sending

NOTIFY from the UCM6510 which will include the XML config file URL for

the SIP device to download.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands