Grandstream Networks UCM6510 User Manual Download Page 266

Page: 266 / 483

P a g e

265

UCM6510 IP PBX User Manual

Version 1.0.20.31

Next, edit the newly created trunk and click on the

Advanced Settings

tab. Make sure the

IPVT Mode

option

is checked. Otherwise, you may experience audio issues when dialing into IPVT.

Figure 158 - IPVT Mode

Finally, create an outbound route for this trunk. This route will be used to dial IPVT meeting IDs. Due to

IPVT meeting IDs having a random assortment of numbers, it is recommended to use a unique code to

precede the meeting ID so that UCM can direct calls to the IPVT trunk without fail (e.g., *99). In the below
image, “x.” would be the meeting ID.

Figure 159 - IPVT Outbound Pattern

However, if a unique code is used, users must also configure the

Strip

field to remove the unique code from

the meeting ID before the call is sent to IPVT.

Summary of Contents for UCM6510




































































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands

Grandstream Networks UCM6510, User Manual

Search results

Summary of Contents for UCM6510

Reviews:

Related manuals for UCM6510

Brands by name

Popular brands