Genesis GEN3t, User Manual, Page: 6 / 1124

4.2.2 Remove/replace the battery from the PC section 64
4.3 Recharging 67
4.4 Disposal 68
5 Mains Power 69
5.1 Power and frequency requirements 69
5.2 Connecting power 70
5.3 Fuse requirements and protection 72
5.4 Fuse replacement 73
6 Introduction 75
6.1 Introducing GEN3t 75
6.2 Mainframe overview 76
6.2.1 Mainframe feature comparison 77
6.3 Hardware 79
6.3.1 PCI-e/CPCI Backplane 79
6.3.2 Input cards 80
6.3.3 Master/Slave support 80
6.3.4 Thermal protection 80
6.4 Acquisition 82
6.4.1 StatStream® 82
6.5 Signal conditioning 84
6.6 Data storage 85
6.7 Interface/Controller section 86
7 Setting up the GEN3t 87
7.1 GEN3t connections 87
7.2 Connecting the GEN series to a network 88
7.2.1 Default network settings 89
7.2.2 Connecting the GEN series directly to a PC 89
7.2.3 Connecting the GEN series to a company network 90
7.2.4 Note on IP address and DHCP 90
7.2.5 Network testing and troubleshooting 92
7.3 Restore default network settings 93
7.4 Removing and installing input cards 94
7.4.1 Removing cards 94
7.4.2 Installing cards 95
7.5 Handle 97
7.5.1 Turning the handle 98
7.6 Feet 101
GEN3t
6 I3995-3.1 en HBM: public