Customization and ordering
First, check whether there are 5B modules that do the job with respect to their
fixed input range and the other limitations available. The output range is very
often suitable because the Genesis input cards used with the 5Bs offer a
16 bit resolution. Therefore, the modules normally have a resolution high
enough for any range required. Then, select the proper module and define the
input connectors needed for the sensor used.
From there, the special card can be “customized” on site by the local service
department or through an outside vendor.
The 5B Integration card can be ordered from HBM and the 5B modules from
any of the 5B vendors. The designer needs to take care of the cabling,
connectors and the specific documentation.
What is included?
When ordering the 5B Integration card, the following components are included:
A
B
C
D
E
F
G
Figure 13.5:
5B Integration card components
A
Genesis 5B Integration card 1x
B
Execution/Genesis blind single with handle 1x
C
Bracket/Genesis 5B carrier clamp 6x
D
PAN/Genesis blind single with handle 1x
E
Screw M2.5x0.45 12Torx 2x
F
Screw M3x0.5 6ST 2x
G
BRKT/Genesis carrier airflow 1x
GEN3t
352
I3995-3.1 en HBM: public