H.1.6
Cylinder Pressure Analysis customer evaluation
HBM offers a 30 day evaluation version of this special software to see if this
meets the requirements.
Special wishes can be adapted as cost option after consulting our CSI
programmer.
H.1.7
Cylinder Pressure Analysis and TDC settings
The Cylinder Pressure Analysis application is able to use all of the available
TDC settings. When properly used during the recording process, the defined
Offset
,
Analysis interval
and
Cycle size
of the Cylinder pressure analysis CSI
will automatically process every new recording without user interaction.
Defining the
Cycle Size
, the
Analysis Interval
and analysis
Offset
relative to
the
TDC
signal is done using the configuration dialog of the Cylinder Pressure
Analysis application as shown in Figure H.7.
Figure H.7:
Cylinder Pressure Analysis Configuration
GEN3t
I3995-3.1 en HBM: public
899