K.3.2
GN814 Basic XT ISO 200kS/s input card
l
8 analog channels
l
Unbalanced differential inputs
l
±
2 V to
±
100 V input range
l
250 V DC isolation
l
User selectable digital Bessel and FIR filters
l
200 kS/s sample rate
l
16 bit resolution
l
128 MB memory
l
Single isolated BNC for each channel
The GEN DAQ Basic XT ISO 200 kS/s input card is a general
purpose signal conditioner for use with voltage inputs, externally
conditioned signals or isolated probes and current clamps.
The basic signal conditioner provides eight channels of isolated
single
-
ended voltage inputs from
±
2 V to
±
100 V Full Scale with
full offset and auto
-
zero capability. Every channel is equipped with
an independent full range input amplifier, a seven
-
pole Bessel and
Butterworth anti
-
alias filter, a 16 bit Analog
-
to
-
Digital converter
and several selections of digital filtering.
The on
-
board transient memory size is 64 Mega
-
Samples (128
Mega
-
Bytes). The memory is shared among enabled channels.
Each channel also features two set
-
points for trigger or alarm
purposes. Extensive acquisition and trigger modes allow for many
different ways to capture valuable data, even at the highest sample rates. All
channels are synchronously sampled at full speed without multiplexing and
almost immeasurable crosstalk. The model uses standard isolated BNC
connectors, whose shells are connected to isolated ground. The inputs have
an impedance of 1 MΩ and are compatible with isolated probes and current
clamps.
For more information on the GN814 Basic XT ISO 200K input card, please refer
to "B2889-5.1 en (GEN series GN814)" on page 1046.
1
2
3
4
5
6
7
8
1 MW 250Vpk
!
1
2
3
!
4
5
6
7
8
GEN3t
954
I3995-3.1 en HBM: public